Vender 2pcs Car Door Logo Lights Projector for Audi A1 A3 A4 A5 A6 A7 A8 Q3 Q5 melhor preço

This welcome lights is installed into the under surface of the car doors. When the door is opened, the logo light is powered on and will be projecting onto the ground. When you close the door, the logo light disappears. The lights can be compatible with AUDI cars: A1 (2012-2016) A3 (2010 to 2016) A4 (2007 to 2017) A5 (2008 to 2017) A6 (2000 to 2017) A7 (2012 to 2017) A8 (2004 to 2017) Allroad (2003 to 2017) Q3 (2013 to 2017) Q5 (2009 to 2017) Q7 (2007 to 2017) R8 (2007 to 2017) RS4 (2004 to 2017) RS5 (2004 to 2017) RS6 (2004 to 2017) RS7 (2013 to 2017) S3/S4/S5/S6/S7/S8 (2004 to 2017) TT/TTS (2008 to 2017) Attention please: 1. For above car models, before making order, please check whether your original car door light can be powered or not? If there is no power supply for your original door light, this items can't fit your car. Because even for the same model, some general configuration hasn't power supply for the door lights, only its deluxe configuration has power supply for the door lights. 2. For some cars, because of the position of the door lights, the light projection is hitting the door when it is opened, and therefore, only a part of projecting appears on the ground. If you mind it, please don't buy. Thanks for your understand. Specification: Current: 0.15MA Input Power: 5W Color Temp: 6500K Voltage: DC 12/24V Material: PVC Chip: CREE How to replace car door light(Installation Instructions): 1. Use A Flathead Screwdriver to Remove and Disconnect Original Door Step Lights; 2. Plug in New Door Lights with Correspondent Connector; 3. Put new Door Lights to The Spot Where Your Original Lights Were; 4. Done! Logo Should Be Projected on The Ground. Package include: Door light*2