Vender Módulo De Fonte De Alimentação LM2596 LM2596S ADJ DC-Com Regulador De Tensão Ajustável 5V/12V/24V 3A melhor preço
4.6
20
avaliações
39
vendido
R$ 10,28
Marca | No Brand |
---|---|
Envio de | China Continental |
Descrição do Produto
Descrição do produto em inglês após português
Modelo/nome: módulo de relevo de pressão lm2596s dc
Tensão de entrada: 3.2v~40v
Tensão de saída: 1.25v~35v
Corrente de saída: 3a (máximo)
Eficiência de conversão: 92 por cento (alta)
Ripple de saída: < 30mv
Frequência de comutação: 65 khz
Temperatura de trabalho: - 45°C~+ 85°C
Tamanho: 43mm x 21mm x 14mm (comprimento x larg. x altura)
Polo positivo in+input em - pólo negativo de entrada!
Out+aída catode fora - polo negativo saída
Faixa de tensão de entrada: dc 3.2v a 40v (tensão de entrada deve ser mais de 1,5v superior ao que a tensão de saída.Pressão não de elevação)
Faixa de tensão de saída: dc 1,25 v a 35 v de tensão contínuamente ajustável, alta eficiência (até 92%) corrente máxima de saída é 3a.
Taxa de ajuste de carga de entrada 12v e corrente de saída 5v 1a é menor de 1%
Obs: este é um módulo relevo de pressão, a tensão de entrada deve ser superior a tensão de saída.
Corrente de saída maior que 2,5a (ou poder de saída maior que 10w) horas de longas úteis por favor adicionar folha de dissipação de calor
**************************************************
Model/name: lm2596s dc-dc pressure relief module
Input voltage: 3.2v~40v
Output voltage: 1.25v~35v
Output current: 3a (maximum)
Conversion efficiency: 92 per cent (highest)
Output ripple: < 30mv
Switching frequency: 65 khz
Working temperature: - 45°C~+ 85°C
Size: 43mm x 21mm x 14mm (long x wide x high)
In+input positive pole in - input negative pole!
Out+output cathode out - output negative pole
Input voltage range: dc 3.2v to 40v (input voltage must be more than 1.5v higher than output voltage.Cannot lift pressure)
Output voltage range: dc 1.25 v to 35 v voltage continuously adjustable, high efficiency (up to 92%) maximum output current is 3a.
Load adjustment rate of 12v input and 5v output current 1a is less than 1%
Note: this is a pressure-relief module, the input voltage must be higher than the output voltage.
Output current greater than 2.5a (or output power greater than 10w) long working hours please add heat dissipation sheet