Brazil

Unique selling point

1. Wifi+Bluetooth dual mode
Connect to the network faster. The connection network speed is 2 times faster than only Wifi
2.WIFI+433: It can be controlled by tuya APP, voice speaker, and can be controlled by wireless switch and remote control, which is more convenient
3. The mini figure can be directly installed in the switch bottom box without placing it on the ceiling, which is convenient for maintenance and operation
4.16A high power meets the power of most electrical appliances, safer than 10A
5. Support 2 way control: can be used with the dual control mechanical switch before connecting to the home
6. Use with Amazon Echo and Google Home, Tmall Genie
7. Share with family for common control
8.3 states: default on or off, or memory state
9. Countdown, timing, sharing function
10.RF433 radio frequency function with remote control control
 
11. It is more convenient and reasonable to use the remote control + wireless switch together
12. High-power 16A switch, can be used with a variety of equipment, DIY (air conditioning
, Light bulb, fan, oven. )
13. Simple pairing and convenient operation, which can turn various devices at home into wireless remote control devices
Main specifications:
Input voltage: 100-240V 50 / 60Hz
Maximum load current: 16A
WiFi standard: 2.4GHz 802.11 b/g/n
Working frequency: 433.92MHZ
Learning code: EV 1527
Application name: Tuya  / Smart Life
Size: 59 * 42 * 20mm
Remote control parameters

Senderfrequenz: 433,92 MHz
Coding method: learning code EV 1527
Item size (each item): about 11*3.7*1.4cm (length*width*height)
Item weight (each): about 30 grams
Remote control battery: 12V 23A battery (including battery)

Controller installation

1. Please turn off the power when installing

2. If the N and L wires of the input terminal are installed oppositely, the bulb will light up or flicker slightly.

3. If the installation directions of the input and output terminals are opposite,
The receiver may become unstable or unusable
Maximum current: 16A / each controller

E.g:
Voltage = 220V, power = <2000W;
Voltage = 110V, power = <1100W
How to pair signals

method 1:

1. Press and hold the learning button for 5 seconds until the indicator light keeps on (controller)
2. Press the remote control 2 times
3. The indicator light (controller) flashes twice
4. The pairing signal is successful